Breaking the management mode of the original constant temperature and humidity test chamber operators, inspection personnel and maintenance personnel, and strengthening the training of operators' equipment knowledge, enabling them to carry out daily inspection and maintenance of similar equipment operated. Equipment management such as maintenance, self-inspection, and fault handling. What maintenance skills should the operator have in the “Inspection and Integration” mode?
First, the manufacturer recommends placing the test chamber in a more benign temperature environment, the best use environment temperature and humidity: 5 ° C ~ +30 ° C ≤ 85% RH, for laboratories that do not have this condition, to ensure the life of the compressor and the overall machine The experimental effect must be equipped with air conditioning.
Second, the waterway and humidifier cleaning: If the waterway is not smooth, the humidifier scaling is likely to cause the humidifier to dry, and may damage the humidifier, so the waterway and humidifier must be cleaned regularly;
Third, the circulating fan blades and condenser fans are clean, similar to the cleaning evaporator. Due to the different working environment of the test box, small particles such as dust will be condensed on the circulating fan blades and the condenser fan, and should be cleaned regularly.
4. If the constant temperature and humidity test chamber is not used for a long time, the inner wall should be clean and dry, and the equipment should be powered once every 1 week for no less than 30 minutes.
5. Regularly clean the high and low temperature test chambers to ensure good ventilation and heat transfer performance. For the compressor to be cooled by water, in addition to ensuring the inlet pressure and inlet temperature, the corresponding flow must be ensured. The inside of the condenser is cleaned and descaled to obtain its continuous heat exchange performance;
6. If it is necessary to relocate, it is best to carry out under the guidance of the technical staff of Yashilin to avoid unnecessary damage or leakage of refrigerant;
In fact, both small art and expensive precision instruments require regular maintenance to extend life.


Single Stove

Single Burner Stove,Single Burner Gas Stove,Single Burner,One Burner Gas Stove

GUANGDONG INWIN INDUSTRIAL GROUP CO. ,LTD. , https://www.inwin1979.com